How to Change the Setting on a Pureline Salt System

Difficulty:

Beginner

Tyler Aviles

February 25, 2025

Sometimes you might have to change some settings on your Pureline salt system. This is a complete step-by-step guide on how to change the setting for the Pureline salt system. This is for models PL7700, PL7701, PL7703.

Tools Needed:

No items found.

Supplies Needed:

No items found.

Step 1

Change the Temperature Units

Ensure the switch is on auto. From the beginning slide the main switch from auto to off then back to auto, and press the system status button 1x to display the temperature.

Press 1x - DIY Pool Resources - INYOPools.com

Step 2

Move the switch to Change the Temperature Units

Move the switch from auto to super chlorinate back to auto. This will change the units from Celsius to Fahrenheit or vice versa.

Changing temp f to c - DIY Pool Resources - INYOPools.com

Step 3

Change the Salt Level Units from Grams/Liter to Standard Parts Per Million

Starting from the beginning press the system status button 5x.

Press button 5x - DIY Pool Resources - INYOPools.com

Step 4

Slide the Main Switch from Auto to on and Back to Auto

Note: The salt system level will instantly change to parts per million or vice versa if it is already on that.

CHanging units - DIY Pool Resources - INYOPools.com

Step 5

Change the Salt Cell Type

Ensure the switch is on auto. From the beginning reading slide the main switch from auto to off then back to auto, and press the system status button 8x. This should display a F-** number