How To Program A Century Evo Motor Schedule Set A & B

Turn the power off by flipping the breaker.

Using a Philips screwdriver Remove the four screws from the top plate.

Once the top screws are removed, lift the top plate off the motor and let it hang to the side.

Use a voltmeter (multimeter) to ensure the motor’s power has been cut off.

Use a flathead screwdriver to adjust the dipswitches according to the schedule set you want to use.

Note: Schedule set A is dipswitch  3 and 4 off and Schedule set B is 3 on 4 off.

 Reattach the top plate with the four screws using a Philips screwdriver.

Reapply power to the motor by turning the breaker back on.

Press and hold the button for 3 seconds to enter schedule set mode.

(Light will blink rapidly) 

Press the button according to the number of times for your desired schedule.

Example: To set Schedule 3, press the button 3 times.

After setting your desired schedule, hold the button down for 3 seconds to exit the schedule set mode.

 While in the regular Operations Mode, press the button 3 times to check your schedule.

Note: The light will turn off. When it comes back on count the blinks.