How to Replace a Run Capacitor

Turn the power off to the motor by flipping the breaker.

Use a Philips-head screwdriver to remove the cover screws on either side of the capacitor doghouse.

(Keep the two screws you will need them later.)

Use a voltmeter (or multimeter) to make sure there is no power going to the motor.

 Use your screwdriver to neutralize any charge that the old capacitor still has.

Use a pair of pliers to remove the wires carefully so you don’t damage them.

Plug in the new capacitor with your pliers.

Reinstall the cover with the screws you kept using a Philips head screwdriver.

Turn the breaker back on to resupply power back to the motor.