How to Replace a Start Capacitor

Turn the power going to the motor off by flipping the breaker.

Use a flathead screwdriver to loosen the two screws and remove the back cover.

Use a voltmeter (or multimeter) to ensure power to the motor has been cut off

 Discharge the old capacitor using the flathead screwdriver by contacting both capacitors’ leads simultaneously.

Note: Discharging the capacitor may cause a spark

Use a Philips-head screwdriver to unscrew the saddle clip.

Use a pair of pliers to remove the wires from the capacitor.

Note: Take a picture of the wires to reconnect the new capacitor correctly. Mark ends with tape if needed.

Plug the motor wires back into the new capacitor the same way your old one was hooked up.

Use a flathead screwdriver to reinstall the back cover.

Use a flathead screwdriver to reinstall the back cover.

Flip the breaker to give power back to the motor.